•  Lubrication

1. Add lubricating oil to the appropriate lubrication points without excessive amounts or leaks.

2. Replace lubricating oil regularly and replace it according to the accumulated usage time specified in the operation manual.

3. Pay attention to the type and viscosity requirements of the lubricating oil. The lubrication system should be cleaned before replacing the lubricating oil.

• Cleaning

1. Clean the drilling rig equipment regularly to prevent dust, oil and other impurities from adhering to the equipment for a long time.

2. During the process of cleaning equipment, direct flushing of electrical appliances and pneumatic components should be avoided.

3. Use appropriate cleaning agents for cleaning. The selection of cleaning agents should take into account its sterilization, oil removal and other properties.

•  Inspection

1. Regularly perform functional inspections on drilling rig equipment to ensure normal operation

2. Check whether the fasteners of the equipment are loose, worn, corroded, etc.

3. Check the equipment’s guide parts, transmission parts, oil seals, etc. to ensure their normal operation.

• Maintenance

1. The equipment should be maintained regularly, wearing parts should be replaced, and all parts of the equipment should be maintained.

2. Pay attention to the storage environment of the equipment and avoid direct sunlight, rain, etc.

3. If the equipment is not used for a long time, anti-rust treatment should be carried out regularly and appropriate anti-rust oil should be applied.

In short, the maintenance of drilling equipment is an indispensable part of the drilling industry, and correct maintenance is particularly important. During the maintenance process, attention should be paid to the use of appropriate lubricants and cleaning agents, frequent inspections and repairs, and regular replacement of lubricants. These measures can effectively extend the service life of the equipment and improve its work efficiency.